SENA STS Series - Manual (Page 30)

30
hostname (i.e. [email protected] or [email protected] ).
The SMTP user name and SMTP user password are required when either SMTP with authentication
or POP-before-SMTP mode is selected.
Figure 3-5 SMTP Configurations
Figure 3-6 SMTP mode selection in SMTP configuration
3.5. IP Filtering
The STS Series prevents unauthorized access using either an IP address based filtering method or
through the management web page of the STS Series. The users can allow one of the following
scenarios by changing the parameter settings:
- Only one host of a specific IP address can access the STS Series
- Hosts on a specific subnet can access the STS Series
- Any host can access the STS Series
The IP filtering feature for access to Telnet console, SSH console or Web server may be enabled or
disabled. The factory default of the filtering feature is “Enabled”.