SENA STS Series - Manual (Page 120)

120
Appendix 6. Using STS Series With Serial/IP
A 6.1. STS Series vs. Serial/IP Options
Table A-8 STS Series vs. Serial/IP option compatibility matrix table
Serial Port Configuration of STS Series Serial/IP Configuration
Host mode Configuration
Cryptography
Configuration
Host mode Telnet Protocol
Encryption
Method
Credentials
Connection
Protocol
Security
TCP Disabled None
No login
required
Raw TCP
connection
Disable
TCP Enabled None
No login
required
Telnet Disable
TCP Disabled
“SSLv2” or
“SSLv3
rollback to v2”
No login
required
Raw TCP
connection
Negotiate
SSLv3/TSLv1
TCP Disabled
“SSLv3” or
“SSLv3
rollback to v2”
No login
required
Raw TCP
connection
SSLv3
TCP Disabled
“TLSv1” or
“SSLv3
rollback to v2”
No login
required
Raw TCP
connection
TSLv1
TCP Enabled
“SSLv2” or
“SSLv3
rollback to v2”
No login
required
Telnet
Negotiate
SSLv3/TSLv1
TCP Enabled
“SSLv3” or
“SSLv3
rollback to v2”
No login
required
Telnet SSLv3
TCP Enabled
“TLSv1” or
“SSLv3
rollback to v2”
No login
required
Telnet TSLv1
Please note that “SSLv3 rollback to v2” option in STS series means “Negotiate SSLv3/TSLv1” option
in Serial/IP.
If encryption method of STS Series is set as “SSLv3”, then client (Serial/IP) cannot connect to STS