SENA STS Series - Manual (Page 116)

116
-----------------------------------------------------------------------------
Hardware Test
-----------------------------------------------------------------------------
Select menu
0. Test Mode - One time
1. Auto test
2. DRAM test
3. FLASH test
4. LED test
5. EEPROM test
6. UART test
7. PC card test
8. Ethernet test
Back, Refresh
----->1
******* Hardware auto-detect and auto-test *******
[DRAM]
DRAM Test in progress ----------------------------------------[65536KB]
DRAM Test ----------------------------------------------------[SUCCESS]
[FLASH]
Flash Test Status---------------------------------------------[
100 %]
Flash Test ---------------------------------------------------[SUCCESS]
[FAN]
Fan Status --------------------------------------------------[7020 RPM]
[LED]
SERIAL READY LED ON/OFF---------------------------------------3 time(s)
[EEPROM]
EEPROM
: A Type exist
EEPROM Test ------------------------------------------------- [SUCCESS]
[UART]
<--Internal loop test-->
Port # 1 test in progressing(Read/Write)----------[SUCCESS]
Port # 2 test in progressing(Read/Write)----------[SUCCESS]
.
.
.
Port # 7 test in progressing(Read/Write)----------[SUCCESS]
Port # 8 test in progressing(Read/Write)----------[SUCCESS]
<--External loop test-->
Port # 1 test in progressing(Read/Write)----------[SUCCESS]
(RTS/CTS)-------------[SUCCESS]
(DTR/DSR)-------------[SUCCESS]
Port # 2 test in progressing(Read/Write)----------[SUCCESS]
(RTS/CTS)-------------[SUCCESS]
(DTR/DSR)-------------[SUCCESS]
.
.
.
Port # 7 test in progressing(Read/Write)----------[SUCCESS]
(RTS/CTS)-------------[SUCCESS]
(DTR/DSR)-------------[SUCCESS]
Port # 8 test in progressing(Read/Write)----------[SUCCESS]
(RTS/CTS)-------------[SUCCESS]
(DTR/DSR)-------------[SUCCESS]
[PCMCIA]
5V CARD
5.0V card found: Lucent Technologies WaveLAN/IEEE Version 01.01
Network Adapter Card