B&B Electronics PCI-1711 - Manual - Manual (Page 56)

Chapter 5
– 48 –
PCI-1710 series User’s Manual
Advantech Co., Ltd.
www.advantech.com
Step 8: Auto-calibration is finished. (See fig. 5-10)
Figure 5-10: A/D Calibration is finished
D/A channel Auto-Calibration
Step 9: Click the Auto D/A Calibration tab to show the D/A channel
auto calibration panel. Please finish the A/D calibration
procedure first before you start the D/A calibration proce-
dure. There are two D/A channels in PCI-1716; select the
output range for each channel and then press the start button
to calibrate D/A channels (Fig. 5-11).
Figure 5-11: Range Selection in D/A Calibration