B&B Electronics PCI-1711 - Manual - Manual (Page 27)

Chapter 2
– 19 – PCI-1710 series User’s Manual Advantech Co., Ltd.
www.advantech.com
2.5 Device Testing
Following through the Setup and Configuration procedures to the last
step described in the previous section, you can now proceed to test
the device by clicking the Test Button on the I/O Device Installation
dialog box (Figure 2-8). A Device Test dialog box will appear accord-
ingly:
Figure 2-9: Analog Input tab on the Device Test dialog box
On the Device Test dialog box, users are free to test various functions
of PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/1716L on the
Analog output, Digital input, Digital output or Counter tabs. And the
Analog output function only available for 1710/1710HG/1711/1716.
Note:
✎ You can access the Device Test dialog box either by the previous
procedure for the Device Installation Program or simply by accessing
Start/Programs/Advantech Driver for 95 and 98 (or for NT/2000) /
Test Utility.
✎ All the functions are performed by software polling method. For high-
speed data acquirement or output, they have to use corresponding VC
example like ADINT or ADDMA or ADBMDMA.