B&B Electronics PCI-1711 - Manual - Manual (Page 115)

Appendix F
– 107 – PCI-1710 series User’s Manual Advantech Co., Ltd.
www.advantech.com
Appendix
F
F. Screw-terminal Bord
F.1 Introduction
The PCLD-8710 Screw-terminal Board provides convenient and reliable
signal wiring for the PCI-1710 series card, both of which have a 68-pin
SCSI-II connector.
This screw terminal board also includes cold junction sensing circuitry
that allows direct measurement of thermocouples trans-ducers.
Together with software compensation and linearization,every thermo-
couple type can be accommodated.
Due to its special PCB layout you can install passive components to
construct your own signal-conditioning circuits. The user can easily
construct a low-pass filter, attenuator or current shunt converter by
adding resistors and capacitors on to the board circuit pads.
F.2 Features
• Low-cost screw-terminal board for the PCI-1710 series card with 68-
pin SCSI-II connector.
• On-board CJC (Cold Junction Compensation) circuits for direct
thermocouple measurement.
• Reserved space for signal-conditioning circuits such as low-pass
filter, voltage attenuator and current shunt.
• Industrial-grade screw-clamp terminal blocks for heavy-duty and
reliable connections.
• DIN-rail mounting case for easy mounting.
• Dimensions:169 mm (W) x 112mm (L) x 51mm (H)
(6.7" x 4.4" x 2.0")