B&B Electronics MESR900 Series - Fiber Models - Manual - Manual (Page 52)

8. Modbus Help VlinxMESR9xx Modbus Gateway
Page 48 Manual Documentation Number MESR9xx-2113m
www.bb-elec.com/
www.bb-europe.com/
Figure 53. Port 1 Modbus
5. Configure the Port 1 Modbus Settings. In this case Attached should be slaves,
Modbus should be RTU. The other settings depend on your application.
6. Configure Port 2 Serial and Modbus is the same fashion.
7. Access Modbus ID Remapping for each port and configure as necessary.