beautypg.com

B&B Electronics MESP211D_T - Manual User Manual

Page 41

background image

Setup and Connections

Vlinx MESP211 Modbus Gateway

40

Default Gateway = 192.168.0.100

Change the Modbus Gateway’s network settings to:

IP Address = 192.168.0.50

Subnet Mask = 255.255.0.0

Default Gateway = 192.168.0.100

h. Save the settings and remove power from the Modbus Gateway.

i. Re-apply power. Open the Vlinx Modbus Manager Software and select

“Network” as the method to connect to the device.

See also other documents in the category B&B Electronics Accessories communication: