B&B Electronics MESP211D_T - Manual - Manual (Page 35)

Setup and Connections Vlinx MESP211 Modbus Gateway
34
c. The first box in line is the start of the remap range on the serial port you
want to remap. Valid value range is from 1 to 247.
d. The second box in line is the last serial port of that range. Valid value range is
from 1 to 247.
e. The third box in line is the starting ID of a range to remap to. Valid value
range is from 1 to 247.
f. The fourth box in line is auto filled, based on the range filled in the first 3
boxes. Valid value range is from 1 to 247.
g. Save settings by clicking the “Save” button.
9. Modbus ID Routing
a. To access this screen click the “Next” button or click the “Modbus ID Routing”
Link on the left side of the screen.
This screen allows you to set the Modbus Slave ID routing.
Modbus ID Routing Screen Figure 35.