B&B Electronics ZXT9-IOA-KIT - Manual - Manual (Page 50)

Configuration & Operation
44 Manual Documentation Number: ZXTx-IO-x-4113m
Fig 6-18 Analog Input Configuration
6.1.5.4 Analog Output Configuration
1. Select the Analog Output to be configured.
2. Select the required Analog Mode (0 to 10 or 0 to 5 VDC, or 0 to 20 or 4 to 20 mA).
3. Set the value of the analog output on a communications fail safe condition
4. For Calibration of the analog output, refer to the section 6.1.7.
Fig 6-19 Analog Output Configuration