beautypg.com

Digital (relay) output configuration, Analog input configuration – B&B Electronics ZXT9-IOA-KIT - Manual User Manual

Page 49

background image

Configuration & Operation

Manual Documentation Number: ZXTx-IO-x-4113m

43

6.1.5.2 Digital (Relay) Output Configuration

1.

Select the Digital (Relay) Output to be configured.

2.

Select communication

‘Fail Safe’ condition if necessary.

3.

Digital (Relay) Output 1 can be selected to indicate communication failure by selecting the check box. The high or
low level selection is user configurable for the communication failure condition.

Fig 6-17 Digital (Relay) Output Configuration

6.1.5.3 Analog Input Configuration

1. Select the Analog Input to be configured

2. Select the required Analog Mode (0-5 Vdc; 0-10 Vdc; 0-20 mA; 4-20 mA)

3. For calibration, refer to section 6.1.7.

4. For exception reporting, refer to sections 6.1.6.

See also other documents in the category B&B Electronics Accessories communication: