B&B Electronics ZXT9-IOA-KIT - Manual - Manual (Page 19)

Hardware
Manual Documentation Number: ZXTx-IO-x-4113m 13
3.3 Dimensional Information
The dimensional information with mounting holes is shown below.
Figure 3-1 Dimensional Information
3.4 Mounting Options
The Zlinx Xtreme I/O module can be panel or machine mounted. The module can be mounted with or without the optional
mounting ears.
3.4.1 Without the mounting ears
The Zlinx Xtreme can be mounted on a back panel or a machine by removing the top lid. The top lid is removed by unscrewing
the 4 corner screws. The module can be mounted using the supplied screws and nuts through the corner holes. Once
secured, fasten the top cover.
3.4.2 With Mounting ears
4 optional mounting ears and screws are supplied as accessories. The ears can be attached to the Zlinx Xtreme by removing
the top cover and securing through the corner holes. The module then can be mounted on the panel by marking the position of
the holes on the back panel. Fig 3-2 shows the mounting scheme with ears.