beautypg.com

Peer-to-peer slave – B&B Electronics ZXT9-IOA-KIT - Manual User Manual

Page 47

background image

Configuration & Operation

Manual Documentation Number: ZXTx-IO-x-4113m

41

NOTE:

“0” causes the firmware to transfer data as fast as possible with no delays..

5. The Retry Count box contains the number of attempts that will be made to communicate with the Slave device before the

module indicates communication has been lost. Lost communication is indicated by the Power

LED’s blinking. The default

value of 10 is usually satisfactory. The range of values is 10 to 255.

Fig 6-14 Peer-to-Peer Master Configuration

6.1.4.2 Peer-to-Peer Slave

Fig 6-15 Peer-to-Peer Slave Configuration

See also other documents in the category B&B Electronics Accessories communication: