beautypg.com

Assemble supports (16"-24") – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 User Manual

Page 69

background image

10. 4 x 5 Distributor Platform (Optional)

PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series

69

Assemble Supports (16"-24")

1. Attach brace channels to the sides of the support channels using four (4) 1/2" x 1" bolts and nuts.

Angle the knee braces across the bottom sides of the brace channels and attach using four (4)
1/2" x 1" bolts and nuts.

2. Assemble the cross supports to the bottom side of the support channels using the end and middle

sets of holes on the support channels using four (4) 1/2" x 1" bolts and nuts.

(See Figure 10E.)

3. Assemble the external platform support (DSP1648EPS) to the end of the three (3) cross supports

using six (6) 1/2" x 1" bolts and nuts.

(See Figure 10F on Page 70.)

NOTE: For 24" installation the lower knee brace will use the second hole on the brace and the second

hole up from the bottom on the brace channel.

(See Figure 10G on Page 70.)

Figure 10E Distributor Platform Cross Support