beautypg.com

Rest platform – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 User Manual

Page 43

background image

7. Rest Platform

PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series

43

8. Platform braces must be installed from handrail posts to mounting and cross channels using

5/16" x 3/4" flanged hex bolts. Braces should be attached to the outside of the platform post and to
the inside of the mounting and cross channels. NOTE: Safety cage bars (LDR-517BE) are used
as platform braces/tie angle braces through out this installation. Bolt heads should be on inside of
platforms.

(See Figure 7M.)

Figure 7M

9. Install ladder support brackets to the rest platform cross channel using 3/8" x 3/4" hex bolts.

10. Attach ladders to ladder support brackets using 1/2" x 3/4" hex bolts.

(See Figure 7N.)

Figure 7N

See also other documents in the category Grain Systems Equipment: