Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 - Manual (Page 62)

62 PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series
9. Install Hatch
Chapter 9: Install Hatch
1. Attach hatch hinge (HP1624HH) to the hatch deck door (HP1624HDD). Orient hinge so that it opens
the desired direction. (See Figure 9A.) Fasten using 3/8" x 1" carriage bolts hardware.
Figure 9A
2. Install hatch support (HP1624HS) to the bottom of the hatch door using 3/8" x 1" carriage bolts
and nuts. (See Figure 9B.)
3. Fasten peak cap handle (PR-331) to the bottom of the hatch door using 3/8" x 1" carriage bolts
and nuts.
Figure 9B