beautypg.com

Rest platform, Chapter 7 rest platform, Rest platform tie angles to bucket elevators – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 User Manual

Page 35

background image

PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series

35

7. Rest Platform

Chapter 7: Rest Platform

Rest Platform Tie Angles to Bucket Elevators

1. Install rest platform tie angles to the lower trunking on both the ladder side and non-ladder side of the

trunking. Use 1/2" x 1" bolts through the bolt holes indicated for the bucket elevator size being
installed.

(See Figure 7A.)

NOTE: Bolt hole starting location on left side of tie angle is marked with the bucket size.

Figure 7A Tie Angle with Etched Numbers

See also other documents in the category Grain Systems Equipment: