Ladder assembly, Chapter 5 ladder assembly, Through – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 User Manual
Page 10: Chapter 5: ladder assembly
10
PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series
5. Ladder Assembly
Chapter 5: Ladder Assembly
The ladder sections are to be mounted directly to the trunking sections. Quantities and section lengths
may vary depending on overall height of system. If you have a non-standard height system, refer to
supported bucket height reference chart
for the correct ladder package for the system.
Supported Bucket Height Reference Chart
NOTE: Ladders are of a modular design for ease of modification in the field. These illustrations are only
to be used as a “general” guide to installation layout. The exact assembly may vary due to the
unique nature of each bucket elevator.
to help determine if the ladders should be started on the up-leg or
down-leg of the elevator and also aid in the ladder order and rest platform locations for bucket elevators
with heights from 20' through 180'.
Part #
Supported Bucket Height (Ft.)
Part #
Supported Bucket Height (Ft.)
1636XRLAD20
0-29
1636XWLAD20
0-29
1636XRLAD30
30-39
1636XWLAD30
30-39
1636XRLAD40
40-49
1636XWLAD40
40-49
1636XRLAD50
50-59
1636XWLAD50
50-59
1636XRLAD60
60-69
1636XWLAD60
60-69
1636XRLAD70
70-79
1636XWLAD70
70-79
1636XRLAD80
80-89
1636XWLAD80
80-89
1636XRLAD90
90-99
1636XWLAD90
90-99
1636XRLAD100
100-109
1636XWLAD100
100-109
1636XRLAD110
110-119
1636XWLAD110
110-119
1636XRLAD120
120-129
1636XWLAD120
120-129
1636XRLAD130
130-139
1636XWLAD130
130-139
1636XRLAD140
140-149
1636XWLAD140
140-149
1636XRLAD150
150-159
1636XWLAD150
150-159
1636XRLAD160
160-169
1636XWLAD160
160-169
1636XRLAD170
170-179
1636XWLAD170
170-179
1636XRLAD180
180-189
1636XWLAD180
180-189
1636XRLAD190
190-199
1636XWLAD190
190-199
1636XRLAD200
200-209
1636XWLAD200
200-209
CAUTION
Due to O.H.S.A. standards, it is required that a rest platform be installed every 30'.