Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 - Manual (Page 39)

7. Rest Platform
PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series 39
Rest Platform Cross Channel to Rest Platform Mounting Channels
1. Place the rest platform cross channels between the rest platform mounting channels and connect
those using 3/8" x 3/4" hex bolts. (See Figure 7G.)
Figure 7G Rest Platform Cross Channel to Rest Platform Mounting Channels
2. Attach rest platform deck to the bottom of the rest platform mounting channels and rest platform
cross channels, using 3/8" x 3/4" hex bolts. Bolt heads should be installed against the deck plate.
(See Figure 7H.) NOTE: The deck plate can be mounted on either the right or left side, but the flange
must be mounted towards the opening.
Figure 7H Deck Plate