beautypg.com

Install platform posts – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 User Manual

Page 56

background image

8. 16"-24" Head Platform Assembly

56

PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series

Install Platform Posts

NOTE: Platform posts are not flush with bottom of deck.

1. At the up-leg end, align two (2) platform posts (HP1648HCP) as described and connect to the

decking where Deck E intersects with Decks A and C. Use 5/16" hex flange nuts (S-3611) and
5/16" x 3/4" flange bolts, connect the platform posts to the decking.

NOTE: Rail support braces should be between the posts.

2. At the discharge end, align platform posts as described and attach one platform posts (HP1648HCP)

to the edge of Deck C and Deck A nearest the lower head.

(See Figure 8P.)

Figure 8P Middle End Posts