beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 User Manual

Page 41

background image

7. Rest Platform

PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series

41

5. Install the front and back intermediate handrails to the platform posts using 5/16" x 3/4" flanged hex

bolts. Adjust the rail into position by sliding it out to the correct length.

6. After cutting the two (2) large and two (2) small intermediate handrails, slide them to the correct

length and install them to the handrail posts on the short sides of the platform using 5/16" x 3/4"
flanged hex bolts.

(See Figure 7K.)

Figure 7K