Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 - Manual (Page 23)

6. Tie Angles, Ladder Brackets and Safety Cages
PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series 23
2. Attach trimmed ladder section to the left and right ladder brackets using 1/2" x 1" hex bolts through
the bottom most set of holes.
3. Attach the next ladder section to the ladder brackets using 1/2" x 1" hex bolts through the top set of
holes. (See Figure 6H.)
Figure 6H
4. Secure the bottom of the ladder to the boot or ground. NOTE: Bracket for this step is not included.