Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 - Manual (Page 63)

9. Install Hatch
PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series 63
4. Slide two (2) magnets (16-0092) onto each MS #6 x 3/4" FHS flat head screw (S-7166). Position the
magnet so the screw head is countersunk into the magnet. (See Figure 9C.)
5. Insert screws with magnets through the hatch door and fasten with the #6 flange nut (S-10133).
Figure 9C
6. Align holes on the hatch hinge with holes along the deck opening closest to the kick plates. Install
the hatch door to the decking using 3/8" x 3/4" bolts (S-7105) and nuts. (See Figure 9D.)
Figure 9D