Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 - Manual (Page 48)

8. 16"-24" Head Platform Assembly
48 PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series
2. Install decking support (HP1624DS) to up-leg end of Deck A as shown, using 3/8" x 1" bolts (S-7105)
and 3/8" nuts (S-10028).
3. Install the hatch deck support bar (HP1624HDSX) to Deck A. This piece installs on the underside of
Deck A and extends the width of the deck from edge to edge.
Using 3/8" flange nuts (S-10028) and 3/8" x 3/4" flange bolts (S-7105), connect the hatch deck
support bar to Deck A kick plate and through the holes labeled A2 on Deck A and side toe board.
Torque to standard specifications.
(See Figure 8D.)
Figure 8D Deck A HP Deck Supports