beautypg.com

Install safety cage – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1807 User Manual

Page 32

background image

6. Tie Angles, Ladder Brackets and Safety Cages

32

PNEG-1807 16"-24" Bucket Elevator Platform and Ladder “X” Series

Install Safety Cage

Safety cages are 10' sections, with the exception of the 3' entrance section.

1. Locate safety cage hoops (LDR-BCKTBHP) along the ladder rails where the safety cage hoops will

be installed. NOTE: The end hoops of a 10' section are spaced 4' from the two (2) middle hoops,
which are spaced 2' apart.

See Figure 6S

for spacing.

(See Figure 6S.)

Figure 6S 10' Safety Cage Section

See also other documents in the category Grain Systems Equipment: