Velleman HAM263D - Manual (Page 3)

HAM263D
03 (15/11/2013) VELLEMAN 3
• entry and exit warning beeps on/off
• arm/disarm ring back indication on/off
• instant arming code, both for home and away operation
• connection of siren, bell, satellite siren and strobe light possible
• built-in dynamic battery charger with automatic or manual battery testing
• on-board software section for panic alarms
• possibility to bypass faulty zone(s) to arm the system
• handover option for the instant zones
• connect up to 4 control keypads (order code HAA263D) or key switches (order code HAA80MK)
• tamper-proof
Kit includes
1 x master control unit
1 x weatherproof alarm control keypad (order code
HAA263D)
2 x PIR intrusion detector (order code HAA52N)
1 x electronic siren
1 x
panic button (order code HAA60)
5 x magnetic contacts
1 x 16.5 VAC / 3 A power adapter
Optional
order code HAA263D auxiliary weatherproof control keypad for alarm control panel
order code HAA52N PIR intrusion detector (max. 6, depending on power consumption)
order code HAA60 panic emergency button
order code HAA25 or HAA27 magnetic reed switches
order code HAA54 PIR sensor with double twin optics
order code HAA55 glass break detector with PIR sensor
order code HAA50 ceiling-mounted PIR detector
Optional – arm/disarm control only
order code HAA80MK remote control panel switch with momentary key
order code HAA85WP multi-purpose security keypad - water-resistant
order code HAA2850 self-contained vandal-resistant weatherproof digital access control
keypad with backlight - 2 ch
order code HAA9523S self-contained digital access control keypad
order code HAA85BL self-contained digital access control keypad with backlight
2. Master control unit
2.1 General
The master control unit is the heart of the alarm system. The cabinet contains a baseboard
containing a series of jumpers to set-up the system and a connection block with 28 contacts where
all connections are made to the input devices such as PIR motion sensors, keypad(s), magnetic
contacts etc. …, output devices such as siren(s), strobe lights etc. …
The device should only be installed and serviced by a qualified person.