Velleman HAM263D - Manual (Page 2)

HAM263D
03 (15/11/2013) VELLEMAN 2
User manual
1.1 Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling. This
device should be returned to your distributor or to a local recycling service. Respect the
local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer. Damage
caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
The HAM263D is an all-in alarm system kit designed for home and office protection. The HAM263D
is controlled via a digital keyboard. It can be configured in different partitions that work
independently or in combined operation.
1.2 Safety Instructions
Keep the device away from children and unauthorised
users.
Indoor use only.
Keep this device away from rain, moisture, splashing and
dripping liquids.
Remove power before opening the cover. Be very
careful, touching live wires can cause life-threatening
electroshocks.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
• Keep the device away from splashing and dripping liquids.
• Note that damage caused by user modifications to the device is not covered by the warranty.
1.3 General Guidelines
• Protect this device from shocks and abuse. Avoid brute force when operating the device.
• Protected the device against extreme, dust and moisture.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
1.4 Features
•
arm/disarm status control via digital keypad
• 8 coverage zones divided in two sections
• programmable exit delay, entry delay 1 & 2 and alarm duration time
• independently programmable user codes for section 1, section 2 and the entire system
• user codes of 4 to 6 digits
• response time of each protection zone is independently programmable
•
power low watchdog resets the system before battery is exhausted
• non-volatile memory