Velleman HAM263D User Manual
Page 18
HAM263D
03 (15/11/2013)
VELLEMAN
18
Visible and audible alarm indicators e.g. siren, strobe light ..., are connected to the output relays.
It is important to periodically ensure that these relays still function properly.
•
To initiate a dynamic output relays test, disarm the alarm system.
•
Enter USER CODE,
,
and
.
•
Both timing and latch output relays operate for 5 seconds. Verify that all
visible and audible
alarm indications e.g. sirens, strobe light… are functional
.
•
If an alarm indicator is not working, check the wiring and the device immediately.
•
It is advisable to run this test on a monthly basis.
5.7
HAA263D: Technical specifications
Operating Voltage
12VDC (provided by HAM263D)
Dimensions
117 x 117 x 27mm
Weight
220g
5.8
Digital keypad HAA85WP
Refer to the user manual included with the HAA85WP
MULTI-PURPOSE SECURITY KEYPAD - WATER-
RESISTANT.
5.9
Key switch (HAA80MK)
Refer to the user manual included with the HAA80MK REMOTE CONTROL PANEL SWITCH WITH
MOMENTARY KEY.
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.