Ohaus DEFENDER 7000 BENCH SCALES Manual en - Manual (Page 62)

EN-60 7000 Series Indicators
PrINt1
LIST
4.12.2 Printing Alibi Data
To print alibi records, enter the menu and navigate to the Print>List>Alibi menu (see Section 3.9.6),
then press Yes.
The display shows the first stored record number. Press Yes to accept the displayed value as the
starting record number in the range to be printed.
If a different starting record number is desired:
 Press No to increase the Alibi record number.
 Or press Back to jump to the last Alibi record number stored,
then decrease the Alibi record number,
 Or enter the Alibi record number using the keypad.
 Then press Yes to accept the displayed value as the starting record number in
the range to be printed.
The display shows the last stored record number. Press Yes to accept the displayed value as the
ending record number in the range to be printed.
If a different ending record number is desired:
 Press No to jump to the starting Alibi record number that was just defined.
 Or press Back to decrease the Alibi record number.
 Or enter the Alibi record number using the keypad.
 Then press Yes to accept the displayed value as the ending record number in
the range to be printed.
Alibi records are printed in the format shown in Section 5.3.
NOTE: To print all Alibi records, do not change the Start and End values.
To print a single record, enter the same record number for the Start and End values.
StArt
000002
LISt
ALIBI
StArt
000001
End
002345
StArt
001234
End
001234
End
002344