Ohaus DEFENDER 7000 BENCH SCALES Manual en - Manual (Page 60)

EN-58 7000 Series Indicators
*
1.000
kg
0.000 KG
*
1.000
kg
1.000 KG
StAtS
kg
N 1
StAtS
kg
TOT 1.000
StAtS
kg
STD 0.000
StAtS
kg
MIN 1.000
StAtS
kg
MAX 1.000
StAtS
kg
DIFF 0.000
StAtS
kg
AVG 1.000
StAtS
kg
CLEAR STATS?
*
1.000
kg
0.000 KG
3
PC003
M6x20 BOLT
PC003
DELETE? Y/N
4.10.4 Deleting Stored Data
Select the desired Mode using the Mode button. Enter the Record ID number (without prefix) and
press LIBRARY to view the desired memory location. To view a different Record ID, press No.
Press the CLR button, then Yes to delete the data for the current library record.
The display returns to the current mode.
Note: If you do not want to delete the library record, press No. The display returns to the current
library record. Press Exit to return to the current mode.
4.11 Accumulation and Statistics
The Accumulation feature enables manual or automatic totalizing of displayed values.
Statistical data is stored in memory for review and printing.
Notes: Set ACCUMULATE to MANUAL or AUTO in the SETUP menu. The Accumulation function is
available in Weighing, Counting, Dynamic and Check Weighing modes.
Accumulation data is stored separately for each mode.
To include statistics data when printing, set INFORMATION to ON in the PRINT CONTENT menu.
4.11.1 Accumulating Displayed Values
With ACCUMULATE set to MANUAL, place the item on the scale and press FUNCTION to accumulate
the displayed value.
With ACCUMULATE set to AUTO, place the item on the scale. The displayed value is accumulated
automatically.
The accumulated value is displayed on the second line.
Note: The item must be removed from the scale before the next item can be accumulated.
4.11.2 Viewing Statistics Data
To view the statistics data, press INFO (0 on the keypad). The following statistics data will be
displayed momentarily: number of weighings, total, average, standard deviation, minimum,
maximum, and difference.
4.11.3 Clearing Statistics Data
To clear the accumulation value and statistics data, press the CLR button while the statistics
information is being displayed. When the display shows CLEAR STATS?, press the Yes button to
clear the statistics data or press the No button to keep the statistics data.