Read, A.off, Gross – Ohaus DEFENDER 7000 BENCH SCALES Manual en User Manual
Page 28: Mmenu, Mmode, Reset, Wweigh, Count
EN-26 7000 Series Indicators
5 MINUTES
rEAd
AUTO OFF
2 MINUTES
1 MINUTE
A.OFF
OFF
rEAd
GROSS IND
B
BRUTTO
G
GROSS
GrOSS
OFF
rEaD
END READOUT
mMENU
MODE
mMOdE
RESET
YES
rESEt
NO
mMOdE
WEIGHING
ON
wWEIGH
OFF
mMOdE
COUNTING
ON
COUNt
OFF
3.5.7
Auto Off Timer
Set the automatic shut off functionality.
OFF
= disabled.
1 MINUTE
= the indicator turns off after 1 minute of inactivity.
2 MINUTES
= the indicator turns off after 2 minutes of inactivity.
5 MINUTES
= the indicator turns off after 5 minutes of inactivity.
3.5.8
Gross Indicator
Set the symbol displayed for gross weights.
OFF
= no symbol is displayed.
GROSS
= the G symbol is displayed.
BRUTTO
= the B symbol is displayed.
3.5.9
End Readout
Advance to the next menu or return to the top of the current menu.
3.6
Mode Menu
Enter this menu to activate the desired application modes.
3.6.1
Reset
Reset the Mode menu to the factory defaults. Factory default settings are shown in bold.
NO
= not reset
YES
= reset
NOTE: When LEGAL FOR TRADE is set to ON, the Mode menu cannot be reset.
3.6.2
Weighing Mode
Set the status.
OFF
= disabled
ON
= enabled
3.6.3
Parts Counting Mode
Set the status.
OFF
= disabled
ON
= enabled