Namme, P.tare, Pc001 – Ohaus DEFENDER 7000 BENCH SCALES Manual en User Manual
Page 57: Apww, P001, Ref.wwt

7000 Series Indicators EN-55
NAmME
PC001
NAmME
M4X12 SCREW
P.tArE
0.000 KG
P.tArE
1.000 KG
PC001
SAVE RECORD?
APwW
0.000 KG
APwW
0.012 KG
NAmME
P001
NAmME
123456
P.tArE
0.000 KG
P.tArE
1.000 KG
P001
SAVE RECORD?
rEF.wWt
0.000 KG
rEF.wWt
0.012 KG
NAmME
C001
NAmME
SKU 121590
P.tArE
0.000 KG
P.tArE
0.015 KG
Counting Mode Library Records
The Name of the item is displayed. By default, the Name is the same as the Record ID.
Use the keypad to change the value. Press Yes to accept the value.
NOTE: The Name length can be a maximum of 7 characters.
The Preset Tare of the item is displayed. By default, the current Tare is used as the Preset Tare value.
Use the keypad to change the value. Press Yes to accept the value.
The APW of the item is displayed. By default, the current APW is used as the APW value.
Use the keypad to change the value. Press Yes to accept the value.
To save the record, press Yes.
Percent Weighing Mode Library Records
The Name of the item is displayed. By default, the Name is the same as the Record ID.
Use the keypad to change the value. Press Yes to accept the value.
NOTE: The Name length can be a maximum of 7 characters.
The Preset Tare of the item is displayed. By default, the current Tare is used as the Preset Tare value.
Use the keypad to change the value. Press Yes to accept the value.
The Reference Weight of the item is displayed. By default, the current Reference Weight is used as
the Reference Weight value. Use the keypad to change the value. Press Yes to accept the value.
To save the record, press Yes.
Check Weighing Mode Library Records
The Name of the item is displayed. By default, the Name is the same as the Record ID.
Use the keypad to change the value. Press Yes to accept the value.
NOTE: The Name length can be a maximum of 7 characters.
The Preset Tare of the item is displayed. By default, the current Tare is used as the Preset Tare value.
Use the keypad to change the value. Press Yes to accept the value.