Ohaus DEFENDER 7000 BENCH SCALES Manual en - Manual (Page 37)

7000 Series Indicators EN-35
ON
ON
ON
Scale Number
Set the status.
OFF = the Scale Number line is not printed.
ON = the Scale Number line is printed.
Scale No: X
Difference
Set the status.
OFF = the difference is not printed following the Calibration Test procedure.
ON = the difference is printed following the Calibration Test procedure.
--------- Cal Test ---------
New Cal: 10.000 kg
Old Cal: 9.999 kg
Diff: 0.001 kg
Wt. ID:------------------
------------ End -----------
Information
Set the status.
OFF = the reference information is not printed.
ON = the reference information is printed.
NOTE: The reference information is dependent on the mode and the ACCUMULATE setting.
Examples are shown below.
Mode Accumulate set OFF Accumulate set ON
Weighing None
N: 10
Total: 10.000 kg
Avg: 1.000 kg
Std: 0.001 kg
Min: 0.999 kg
Max: 1.001 kg
Diff: 0.002 kg
Counting
APW: 0.100 kg APW: 0.100 kg
N: 10
Total: 1000 Pcs
Avg: 100 Pcs
Std: 1 Pcs
Min: 99 Pcs
Max: 101 Pcs
Diff: 2 Pcs
Percent
Ref Wt: 1.23 kg Ref Wt: 1.23 kg
Check Weighing
Under: 0.995 kg
Over: 1.005 kg Under: 0.995 kg
Over: 1.005 kg
N: 10
Total: 10.000 kg
Avg: 1.000 kg
Std: 0.001 kg
Min: 0.999 kg
Max: 1.001 kg
Diff: 0.002 kg
Dynamic
Level: 0 Level: 0
N: 10
Total: 10.000 kg
Avg: 1.000 kg
Std: 0.001 kg
dIFF
OFF
CONtNt
DIFFERENCE
INFO
OFF
CONtNt
INFORMATION
SCAL.NO
OFF
CONtNt
SCALE NO