Ohaus DEFENDER 7000 BENCH SCALES Manual en - Manual (Page 58)

EN-56 7000 Series Indicators
C001
SAVE RECORD?
UNdEr
0.000 KG
UNdEr
0.250 KG
OVEr
0.000 KG
OVEr
0.260 KG
NAmME
CC001
NAmME
SKU 121590
P.tArE
0.000 KG
P.tArE
0.015 KG
CC001
SAVE RECORD?
UNdEr
0 PCS
UNdEr
100 PCS
OVEr
0 PCS
OVEr
110 PCS
APwW
0.1200 KG
APwW
0.2300 KG
The Under Limit of the item is displayed. By default, the current UNDER Limit is used as the UNDER
Limit value. Use the keypad to change the value. Press Yes to accept the value.
The OVER Limit of the item is displayed. By default, the current OVER Limit is used as the OVER Limit
value. Use the keypad to change the value. Press Yes to accept the value.
To save the record, press Yes.
Check Counting Mode Library Records
The Name of the item is displayed. By default, the Name is the same as the Record ID.
Use the keypad to change the value. Press Yes to accept the value.
NOTE: The Name length can be a maximum of 7 characters.
The Preset Tare of the item is displayed. By default, the current Tare is used as the Preset Tare value.
Use the keypad to change the value. Press Yes to accept the value.
The APW of the item is displayed. By default, the current APW is used as the APW value.
Use the keypad to change the value. Press Yes to accept the value.
The UNDER Limit of the item is displayed. By default, the current UNDER Limit is used as the UNDER
Limit value. Use the keypad to change the value. Press Yes to accept the value.
The OVER Limit of the item is displayed. By default, the current Over Limit is used as the OVER Limit
value. Use the keypad to change the value. Press Yes to accept the value.
To save the record, press Yes.