Ohaus DEFENDER 7000 BENCH SCALES Manual en - Manual (Page 48)

EN-46 7000 Series Indicators
L.key
LOCK LIBRARY
ON
L.LIb
OFF
L.key
LOCK INFO
ON
L.INFO
OFF
L.KEY
END KEY LOCK
OHAUS
LOCK ON
mMENU
END
3.13.11 Lock Library Button
Set the status.
OFF = the LIBRARY button is not locked.
ON = the LIBRARY button is locked.
3.13.12 Lock Info Button
Set the status.
OFF = the Edit button is not locked.
ON = the Edit button is locked.
3.13.13 End Lock
Advance to the next menu or return to the top of the current menu.
3.14 End Menu
Advance to the Calibration Menu or exit the menu and return to the current application mode.
3.15 Securing the Menu and Key Lock menu settings
A slide switch located on the Main PC Board inside the housing is used to secure the Menu Lock and
Key Lock menu settings. When the switch is set to the ON position, the Menu Lock and Key Lock menu
settings may be viewed but not changed.
Open the housing as explained in Section 2.3.1. Set the position of the switch to ON as shown in
Section 1.2, Figure 1-3, Item 11.
When the switch is in the ON position, the start up display includes the LOCK ON message.
Note: This switch is also used in conjunction with the Legal for Trade menu item.
When the Legal for Trade menu is set to ON, the switch must be set to the ON position to
prevent calibration and changes to metrologically significant settings. Refer to Section 6 for more information.