EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual - Manual (Page 93)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – July 2010
82
3.3.8 H
OW TO
G
ANG
R
ECORDER OR
P
LAYER
C
HANNELS
When channels are ganged, they can be controlled simultaneously from the same
interface: the ganged control panel. It can be opened by double-clicking one of
the ganged channels. Refer to the Control Panel chapter for more information.
Note
It is not possible to gang recorder and player channels.
It is not possible to gang channels that already belong to different gang
groups.
To gang 2 or more channels, proceed as follows:
1. Select the channels with SHIFT+click or CTRL+click.
2. Right-click one of the channels and select Gang.
OR
press +
3.
The ganged channels will now have an icon next to them to signify
their new status.
4. To add more channels to a group: select all channels of the group and the
new channel, right-click and select Gang again.
You can have many different ganged channel groups with a number of channels
per group, performing different tasks on a production.