EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual - Manual (Page 114)

IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment -– July 2010
Issue 5.8.B
103
Button Description
Trains: sends the marked portion of loaded train.
Refer to section ‘Selecting Destination Targets’ on page
101.
GANG When channels have previously been ganged, this
function ungangs, or re-gangs channels.
GRAB Playlists / clips / trains:
Saves a small image of the loaded media for use as a
thumbnail. The thumbnail image will be that of the current
position when you click the GRAB button.
SEL REC Displays a menu with the list of available recorder
channels.
Refer to section ‘Loading a Train’ on page 111.
PLAY Playlists / clips / trains:
Plays the media loaded on the controlled channel.
PLAY VAR Playlists / clips / trains:
Plays the media loaded on the controlled channel at
speed defined in the Control Panel settings.
PAUSE Playlists / clips / trains:
Stops the playout of the media loaded on the controlled
channel.
SNAP Playlists / clips / trains:
Goes back to the last loaded record train at the timecode
where the E/E mode was exited, effectively “snapping”
back to where the user left off in the record train.
PREV Playlists / clips / trains:
Loads the previous playlist element, linked clip or train on
the controlled channel.
PRV TRANS Playlists:
Allows to preview a transition effect between playlist
elements. This starts the play before the element
transition, for the duration of the pre-roll defined in the
Playlist Panel.
NEXT Playlists / clips / trains:
Loads the next playlist element, linked clip or train on the
controlled channel.
SKIP Playlists:
Skips the next playlist element when playing a playlist. If
the button is pressed twice, the next 2 elements will be