EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual - Manual (Page 115)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – July 2010
104
Button Description
skipped, and so on.
E/E Playlists / clips / trains:
Unloads the loaded media and loads the last loaded
record train at its current recording position.
RETURN Clips:
When a clip has been loaded on a player channel,
pressing RETURN loads the same frame of media from
the original record train, if it is still available (not
overwritten in the recorder yet).
IN Playlist elements / clips / trains:
Inserts a Mark IN point at the current position of the
loaded media.
CLEAR then IN Playlist elements / clips / trains:
Clears the Mark IN point which has been set but not yet
saved.
Goto IN Playlist elements / clips:
Goes to the IN frame and timecode of the loaded media.
OUT Playlist elements / clips / trains:
Inserts a Mark OUT point at the current position of the
loaded media.
CLEAR then OUT Playlist elements / clips / trains:
Clears the Mark OUT point which has been set but not yet
saved.
Goto OUT Playlist elements / clips:
Goes to the OUT frame and timecode of the loaded
media.
NEW Playlist elements / clips / trains:
Allows to save a new clip after Mark IN and Mark OUT
points have been defined.
UPDATE Playlist elements / clips:
Allows to save the changes made to a playlist element or
to a clip.
TAKE Playlists / clips / trains:
If the controlled channel is in PGM/PRV mode, the Take
function shifts from the current media on the PGM
channel to the media on the associated PRV channel
using the Take Effect settings as defined in Tools >
Settings > Clips > Clips/Take.