EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual - Manual (Page 116)

IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment -– July 2010
Issue 5.8.B
105
Button Description
LOOP CHNL Changes the loop mode of the controlled channel.
Playlists: no loop ↔ loop (green button).
Clips: no loop ↔ loop (green button) ↔
loop bounce (red button).
Special Buttons
The BEPlay Remote provides 4 buttons which can be used with specific actions or
together with other buttons.
The following table gives a brief description of the action of each button.
Button Description
MENU
• When using the options Sel XT, Last clips, Search TC
and Sel Rec, a list is displayed on the IPDirector
screen.
The MENU button gets out of the list.
• When using MENU – wait for 3s - ENTER: locks /
unlocks the remote.
SHIFT The SHIFT button is used prior to another button to
modify the behavior of this button:
• SHIFT - action button: allows to apply the action
associated to the upper part of the button.
• SHIFT - ENTER: from a list (Last clips, Search TC or
Browse options) inserts the loaded clip to the default
playlist, before or after the loaded element, depending
on the setting.
• SHIFT - MENU button: switches the function buttons
assignment between the normal mode (all channels of
an EVS video server) and the favorite mode (channels
defined in the Remote Control Manager window).
The MENU LED flashes red in favorite mode.
• SHIFT - VAR button and SHIFT - JOG button: refer to
section ‘Wheel Mode Buttons’ on page 106.
• SHIFT – F1 button: used to associate the Software
Player to the remote.
CLEAR The CLEAR button is used prior to another button to
modify the behavior of this button. When it is activated,
its LED is red.
• CLEAR - IN: works as CLEAR IN