EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual - Manual (Page 121)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – July 2010
110
How to Assign Player or Recorder Channels to Function
Buttons in Normal Mode
To assign all the channels from an EVS video server to the function buttons of the
BEPlay Remote, proceed as follows:
1. On the remote, press the SHIFT button and then the SEL XT button.
The list with the available EVS video servers is displayed on screen.
2. Use the remote wheel to select an EVS server.
3. Press the ENTER button of the remote.
Note: To cancel the operation: press MENU.
Recorder channels are assigned to the first Function buttons and the
corresponding LED are red. Then the player channels are assigned to the next
buttons and the corresponding LED are green.
In case the EVS server has less than 6 channels, the exceeding buttons are not
assigned.
S
ELECTING A
P
LAYER
You can select a player channel or the Software Player to be controlled by the
remote.
Selecting a Player Channel
To select one of the player channels, press the Function button which has been
associated to it, as described in section ‘Assigning Channels to Function Buttons’
on page 107.
The LED of the Function button flashes green.
If the player channel is already associated to a Control Panel or a Playlist Panel,
the BEPlay remote icon appears in the Channel Name field: