EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual - Manual (Page 123)

Issue 5.8.B IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – July 2010
112
2. Use the remote wheel to select a recorder.
3. Press the ENTER button of the remote
Note: To cancel the operation: press MENU.
The train is loaded on the player channel controlled by the remote or on the
Software Player.
Rules for Loading a Train
According to the element previously loaded on the controlled player channel, the
behavior will differ as follows:
Element Previously
Loaded Pressing the F button of a recorder…
Playlist loads the corresponding train in E/E.
Clip loads the corresponding train in E/E.
Train in Pause loads the corresponding train in pause at the same
timecode.
Train in Play loads the corresponding train in play at the same
timecode.
Train in E/E loads the corresponding train in E/E.
Loading a Clip
Clips can be selected from different sources to load them on the controlled player
channel:
• From the Search TC list: refer to section ‘Action Buttons on page 101.
• From the Last Created Clips list: refer to section ‘Action Buttons’ on page 101.
• From the Database Explorer grid: refer to section ‘Browsing Clips’ on page 113.