EVS IPDirector Version 5.8 - July 2010 Part 1 User's Manual User Manual
Page 113
Issue 5.8.B
IPDirector Version 5.8 – User Manual – Part 1: General Workspace
EVS Broadcast Equipment – July 2010
102
Button Description
OR
•
to associate the Software Player to the remote. The
Software Player option is displayed in the list only
when the Software Player is associated to a Control
Panel or a Playlist Panel.
BROWSE
Enables or disables the Browse mode. The button is red
in Browse mode.
Refer to section ‘Browsing Media with the BEPlay
LOOP ELEM
Playlists:
•
If the loaded playlist element is not in a partial loop,
the LOOP ELEM button puts it in an infinite loop.
•
If the loaded playlist element is the single element in a
partial loop, the LOOP ELEM button removes the loop.
•
If the on-air playlist element is in a partial loop
containing other clips, the LOOP ELEM button has no
effect.
SEARCH TC
Clips / trains:
Displays the list of clips and trains containing the same
TC as the loaded clip and allows the selection of an
element by using the wheel,
The selected element is automatically loaded on the same
frame as the initial element.
MENU: gets out of the list.
ENTER: appends the loaded clip to the default playlist.
SHIFT - ENTER: inserts the loaded clip to the default
playlist before or after the on-air element.
LAST CLIPS
Displays the list of last created clips and allows the
selection of a clip by using the wheel,
Automatically loads the last created clip on the controlled
channel.
MENU: gets out of the Last Created Clips list.
ENTER: appends the selected clip to the default playlist.
SHIFT - ENTER: inserts the selected clip to the default
playlist before or after the on-air element.
SEND TO
Sends the media to the destinations predefined in the
Remote Control Manager window.
Playlists: sends the loaded playlist.
Clips: sends the loaded clip or marked portion of loaded
clip.