EVS IPDirector Version 6.0 - November 2012 Part 3 User's Manual - Manual (Page 50)

4.6.2. Send To Menu
Note
Icons for destinations targets may have been customized from the Remote
Installer.
4.6.3. How to Send a Clip to the Default Archive
To flag a clip to be sent to the default archive, proceed as follows:
1. Right-click the clip line or XT clip line corresponding to the clip you want to send to the
default archive.
The clip contextual menu is displayed.
2. Select Send To > Default Archive from the clip contextual menu.
The clip is flagged to be sent to the session folder of the XFile defined as the default XFile
on the EVS video server where the XT clip is physically stored.
Refer to the XFile user manual for more information on how to define the session folder.
4.6.4. How to Send a Clip to a Destination Folder
(Destination Target)
IPDirector gives full flexibility to directly send A/V files to third party systems (i.e. NLE
systems). Clips can be sent to a destination target through the XNet network or the GigE
network. The network used for the transfer depends on the setup defined. For more
information, refer to the Technical Reference manual.
38 4. Clips View
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B