EVS IPDirector Version 6.0 - November 2012 Part 3 User's Manual - Manual (Page 117)

12.7. Using Saved Filters
12.7.1. Introduction
Once you have defined filters and search terms, you may want to save them for later use.
You can then apply the same set of filters with a single click.
Saved filters will be common between:
• the Clips tree and the Clip view in bins
• the Playlists tree and the Playlists view in bins
• the Timelines tree and the Timelines view in bins
12.7.2. How to Save Filters
To save filters, proceed as follows:
1. Define the filters you wish to save, as explained in section "Searching the Database"
on page 84.
2. Make sure the Saved Filters pane is visible under the tree view by clicking the
button.
3. Click the Save Filter button in the Save Filter pane.
The New Filters window is displayed:
4. Enter a name for the applied filters set.
5. Click OK to confirm.
The new filter name is listed in the Saved Filters pane.
12.7.3. How to Apply Saved Filters
To apply a saved filter, proceed as follows:
1. Make sure the Saved Filters pane is visible under the tree view by clicking the
button.
2. Select the desired filter(s) in the Saved Filters pane.
◦ Click to select a single filter
IPDirector - Version 6.00 - User Manual - Database Explorer
12. Searching the Database 105