Sending a clip to a destination target, Introduction – EVS IPDirector Version 6.0 - November 2012 Part 3 User's Manual User Manual

Page 49

Text mode
Original mode

2. Select Copy by GigE from the menu and the server you want to copy the clip to from

the Send to sub-menu.

The clip is copied and the

icon appears in the Status column.

Note

When copying a clip to another EVS video server from the same network, this
option can be used rather than the Send to > XT option to avoid the creation of a
target.

4.6.

Sending a Clip to a Destination Target

4.6.1.

Introduction

IPDirector gives full flexibility to directly send A/V files to third party systems (i.e. NLE
systems) and storage paths. Sending media to third party systems will be performed with
the Send to command. Sending media to removable drives will be performed with the
Backup to Nearline command.

IPDirector - Version 6.00 - User Manual - Database Explorer

4. Clips View