American Magnetics 05100PS-430-601 Integrated Power Supply System - Manual (Page 91)

Rev. 5 73
Operation
Setup Submenu : Net Setup
Note
If the IP Address Assignment value is changed, the Model 430
Programmer power must be cycled off for at least 15 seconds and
then back on to complete the change. The previous value will
continue to be used until the Model 430 is restarted.
3.10.5.2 System IP Address
If IP Address Assignment is Static, then the system IP address can
be assigned by the user. The default value is 0.0.0.0.
Note
This item is only available in the Net Setup submenu if IP Address
Assignment is Static. If IP Address Assignment is DHCP, the system
IP address is assigned by the network DHCP server and cannot be
assigned by the user.
3.10.5.3 Subnet Mask
If IP Address Assignment is Static, then the subnet mask can be
assigned by the user. The default value is 0.0.0.0.
Note
This item is only available in the Net Setup submenu if IP Address
Assignment is Static. If IP Address Assignment is DHCP, the subnet
mask is assigned by the network DHCP server and cannot be
assigned by the user.
3.10.5.4 Gateway IP Address
If IP Address Assignment is Static, then the gateway IP address
can be assigned by the user. The default value is 0.0.0.0.
+50.00 A — System IP Address
+0.50 Vs 0.0.0.0
+50.00 A — Subnet Mask
+0.50 Vs 0.0.0.0
+50.00 A — Gateway IP Address
+0.50 Vs 0.0.0.0