American Magnetics 135 & 136 Liquid Helium Level Instruments (CE-Marked) User Manual
American Magnetics Equipment
Table of contents
Document Outline
- Cover Page
- Declaration of Conformity
- Table of Contents
- Foreword
- 1 Introduction
- 2 Installation
- 3 Operation
- 3.1 Sensor-Burnout Protection Mode
- 3.2 Normal Operational Mode
- 3.2.1 Turn on the power
- 3.2.2 Configure the active length setting
- 3.2.3 Configure the HI SETPOINT and the LO SETPOINT
- 3.2.4 Configure the A SETPOINT and the B SETPOINT
- 3.2.5 Select the operational mode of the controller output receptacle
- 3.2.6 Configure the sample time interval setting
- 3.2.7 Select either continuous or sampled update configuration
- 3.2.8 Select the appropriate units display option
- 3.2.9 Connect the optional analog output signal
- 3.3 Dirty Sensor Operational Mode
- 4 Remote Interface Reference
- 4.1 Serial Communication/Data Logger Option
- 4.2 IEEE-488 Communication Option
- 4.3 Error Codes
- 5 Virtual Instrument Operation
- 6 Service Guide
- Appendix
- Index