American Magnetics 05100PS-430-601 Integrated Power Supply System - Manual (Page 137)

Rev. 5 119
Remote Interface Reference
SETUP Configuration Commands and Queries
and V-V Mode Input Range) from being edited. Sending “0” unlocks. A “1”
locks. “0” is the default value.
•
LOCK:SUPPly?
Returns “0” for Select Supply picklist value unlocked, or “1” for locked.
•
CONFigure:LOCK:VOLTage:LIMit {0|1}
Specifies whether use of the VOLTAGE LIMIT SHIFT-key menu is locked
or unlocked. Sending “0” unlocks. A “1” locks. “0” is the default value.
•
LOCK:VOLTage:LIMit?
Returns “0” for use of the VOLTAGE LIMIT SHIFT-key menu unlocked, or
“1” for locked.
•
CONFigure:LOCK:QUench:RESet {0|1}
Specifies whether use of the RESET QUENCH SHIFT-key command is
locked or unlocked. Sending “0” unlocks. A “1” locks. “0” is the default
value.
•
LOCK:QUench:RESet?
Returns “0” for use of the RESET QUENCH SHIFT-key command
unlocked, or “1” for locked.
•
CONFigure:LOCK:QUench:RATE {0|1}
Specifies whether use of the quench rate command is locked or unlocked.
Sending “0” unlocks. A “1” locks. “0” is the default value.
•
LOCK:QUench:RATE?
Returns “0” for use of the quench rate command unlocked, or “1” for locked.
•
CONFigure:LOCK:INCR-DECR {0|1}
Specifies whether use of the INCR. FIELD and DECR. FIELD SHIFT-key
commands is locked or unlocked. Sending “0” unlocks. A “1” locks. “0” is
the default value.
•
LOCK:INCR-DECR?
Returns “0” for use of the INCR. FIELD and DECR. FIELD SHIFT-key
commands unlocked, or “1” for locked.
•
CONFigure:LOCK:FIELD-CURRent {0|1}
Specifies whether use of the FIELD <> CURRENT SHIFT-key command is
locked or unlocked. Sending “0” unlocks. A “1” locks. “0” is the default
value.