American Magnetics 05100PS-430-601 Integrated Power Supply System - Manual (Page 185)

Rev. 5 167
Appendix
Power Supply Details
Isolation voltage 600 Vdc or peak Either output terminal to ground.
Transient recovery for
load change
excursion 1% of Emax 50% load step 2A/microsecond max.
recovery 2 msec Return to 0.1% of setting.
Turnon/turnoff overshoot same as load transient response limits
Overvoltage protection voltage 120% of Emax
Overcurrent protection current 120% of Imax
Overtemperature protection Shutdown
Open Load wire protection Shutdown
GENERAL (ENVIRONMENTAL) SPECIFICATIONS
Temperature
operating -20 to +50 deg C
Rated load. Derate at 25W per °C
between 50 and 70°C.
storage -40 to +85 deg C
Cooling 3 internal dc fans exhaust to the rear
Humidity 0 to 95% RH non-condensing
Shock 20 g, 11msec +/- 50% half sine non-operating
Vibration
5 -10 Hz 10mm double amplitude
3-axes, non-operating
10-55 Hz 2g
Altitude sea level to 10000 ft.
0-3,000 ft: 100%, linear derating to
70% of power at 10,000ft.
Dimensions
English 1.735”H x 19"W x 17.5"D Depth excluding connectors and ter-
minal blocks.
metric 44.45 x 482.6 x 443.7 mm
Weight
English 15 lbs
metric 6.82kg
Source power connector IEC 320-C19 appliance inlet
250 Vac, 16A (VDE);
125 Vac, 20A (UL)
Load connections Nickel plated copper busbars Provision for safety covers.
Analog programming port. 15 pin D-sub
a. Current limited to 100 Adc (1000 W) per power supply unit by AMI system configura-
tion.
Table A-11. Model 08150PS Power Supply Specifications (Continued)
Specification Rating / Description Condition