4 firmware upgrade screen, Figure 182 firmware upgrade, Table 140 firmware upgrade – ZyXEL Communications P-2802H(W)(L)-I Series User Manual
Page 305
Chapter 23 Tools
P-2802H(W)(L)-I Series User’s Guide
305
23.4 Firmware Upgrade Screen
Click Maintenance > Tools to open the Firmware screen. Follow the instructions in this
screen to upload firmware to your ZyXEL Device. The upload process uses HTTP (Hypertext
Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot. See
for upgrading firmware using FTP/TFTP commands.
1
Do NOT turn off the ZyXEL Device while firmware upload is in progress!
Figure 182 Firmware Upgrade
The following table describes the labels in this screen.
After you see the Firmware Upload in Progress screen, wait two minutes before logging into
the ZyXEL Device again.
Table 140 Firmware Upgrade
LABEL
DESCRIPTION
Current
Firmware
Version
This is the present Firmware version and the date created.
File Path
Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two
minutes.